The ONL NPR Tutorial

Summary Information >> User Tools TOC
New Window?

Tcpdump

Tcpdump is a packet capture tool. ONL has made it possible for ordinary users to run tcpdump through the sudo facility and made it accessible via the executable /usr/local/bin/tcpdumpW.

TcpdumpW records packets going to and coming from the data network interface (eth1) and puts them into the dump file /tmp/onl.tcpdump. The default snaplen of 96 bytes of data is used. You can change the snaplen to 200 using the -s 200 command argument, but no other values are allowed.

Once you have the dump file, you can run the normal tcpdump command to read that file and filter it in whatever way you want. In the example below, I am trying to capture the packets going through the n1p2 interface. An iperf server is running on onl006 (n1p3): 

onl006> iperf -s

In a second window, I log into onl007 where the sender will be run, and I start the capture of packets going across the n1p2 interface: 

onl007> /usr/local/bin/tcpdumpW			# create tcpdump file
tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 96 bytes
The data network is accessed through the device name name eth1. The output of ifconfig eth1 would show that this interface has IP address 192.168.1.48 (as expected since the data network interface IP addresses have the form 192.168.X.Y where X = 1 is the logical router number and Y = 48 is equal to 16*(1 + port number) = 16*(1+2)).

In a third window I start the iperf client running on onl007 to generate one second of TCP traffic: 

onl007> iperf -c n1p3 -t 1
The data segments are going from the n1p2 interface to the n1p3 interface.

When the client finishes sending traffic, I terminate the iperf client by entering ctrl-c in the window where I ran tcpdumpW command: 

onl007> ^-c					# terminate dump (ctrl-c)
23235 packets captured
23235 packets received by filter
0 packets dropped by kernel
The output shows that 23,235 packets were captured and none were dropped. I now use the standard tcpdump command (not tcpdumpW) to read the dump data /tmp/onl.tcpdump and output the packet capture in human-readable format: 
onl007> tcpdump -r /tmp/onl.tcpdump -nn -q	# quick output (less output)
16:56:54.288482 arp who-has 192.168.1.63 tell 192.168.1.48
16:56:54.288561 arp reply 192.168.1.63 is-at 44:00:5e:04:01:02
16:56:54.288574 IP 192.168.1.48.34251 > 192.168.1.64.5001: tcp 0
16:56:54.338513 IP 192.168.1.64.5001 > 192.168.1.48.34251: tcp 0
16:56:54.338571 IP 192.168.1.48.34251 > 192.168.1.64.5001: tcp 0
16:56:54.338726 IP 192.168.1.48.34251 > 192.168.1.64.5001: tcp 24
16:56:54.338847 IP 192.168.1.48.34251 > 192.168.1.64.5001: tcp 1448
. . .
I have used the command-line flag -nn to force the output to use numbers instead of names and -q to keep the output short. The output shows the beginning of a TCP iperf flow going from n1p2 (192.168.1.48), port 34251 to n1p3 (192.168.1.64), port 5001. There are two ARP packets followed by the three 0-length TCP segments (n1p2 SYN, n1p3 SYN-ACK, n1p2 ACK) connection phase and then two data segments (24-bytes and 1448-bytes) leaving n1p2.

In summary, I used tcpdumpW to create the dump file /tmp/onl.tcpdump and then tcpdump to read the dump file (-r /tmp/onl.tcpdump) and output a text file to stdout. In practice, I would have redirected the output to a file: 

onl007> tcpdump -r /tmp/onl.tcpdump -nn -q > sndr.txt

In this next example, I filter the dump file so that only the packets from n1p2 are shown (src n1p2) and output in normal output length form (not -q): 

onl007> tcpdump -r /tmp/onl.tcpdump -nn src n1p2	# filter on src
16:56:54.288482 arp who-has 192.168.1.63 tell 192.168.1.48
16:56:54.288561 arp reply 192.168.1.63 is-at 44:00:5e:04:01:02
16:56:54.288574 IP 192.168.1.48.34251 > 192.168.1.64.5001:
	S 1421461992:1421461992(0) win 5840
	<mss 1460,nop,nop,timestamp 4942703 0,nop,wscale 10>
16:56:54.338571 IP 192.168.1.48.34251 > 192.168.1.64.5001:
	. ack 1419217117 win 6 <nop,nop,timestamp 4942754 4941841>
16:56:54.338726 IP 192.168.1.48.34251 > 192.168.1.64.5001:
	P 0:24(24) ack 1 win 6 <nop,nop,timestamp 4942754 4941841>
16:56:54.338847 IP 192.168.1.48.34251 > 192.168.1.64.5001:
	. 24:1472(1448) ack 1 win 6 <nop,nop,timestamp 4942754 4941841>
16:56:54.388816 IP 192.168.1.48.34251 > 192.168.1.64.5001:
	. 1472:2920(1448) ack 1 win 6 <nop,nop,timestamp 4942804 4941892>
. . .
The output has been edited to split long lines into multiple lines. 

 Revised:  Fri, Mar 28, 2008 

  
  

  

  

    

      
        Summary Information
        >>
        User Tools
      
      
        
        TOC